Caution: Do not service the transmission if the automatic transmission fluid is hot. Otherwise, there is a risk of serious burns.
1. Remove the front protective tray No.2.
2. Loosen the measuring probe mounting bolt.
3. Remove the dipstick.
4. Remove the drain plug with washer and drain the automatic transmission fluid.
Note:replace the part with a new one after each removal.
5. Install a new washer and tighten the drain plug to a torque of 30-41 Nm.
6. Fill the automatic transmission fluid (ATF) through the dipstick hole.
Note.
- Automatic transmission fluid is blue in color.
- Use only ATFFZ automatic transmission fluid.
7. Adjust the automatic transmission fluid level.
Note: The amount of working fluid to be filled after it has been drained through the drain hole (approximate value): 3.5-4.9 l.
8. Insert the measuring probe and tighten the mounting bolt to a torque of 8-11 Nm.
9. Install front protective tray No.2.