Removing
Remove trim from trunk lid. To do this, open it. Unscrew the plastic screw above the inner handle and then pry out the sliding clamp with a screwdriver. Unhook the lining with your fingers around the circumference from nine
Pull the rod bushing out of the lock cylinder holder (1).
Move the rod nipple (cable) go ahead and unhook it (2).
Unscrew the nuts securing the lock cylinder from the outer handle.
Remove handle.
Pull out the lock cylinder in the direction of the arrow.
Installation
Insert lock cylinder and outer handle and secure with nuts.
Attach the drive rod.
Install the trunk lid trim.