Contents: Removal ⇓ Installation ⇓
Removal
Remove the door trim. Pull off the protective film in the area of the inner door handle drive, fold it down and secure with adhesive tape.
Loosen the screws securing the inner door handle drive, unhook it outward and unhook the drive rod.
Turn the inner door handle drive and unhook the guide from the drive rod. Unhook the nipple in the direction of the arrow from the handle.
Installation
Attach the drive rod to the inner handle and its drive.
Attach the inner door handle drive and the drive rod to the door frame and secure with screws.
Stick the protective film.
Note: The film must be glued evenly and without folds around the entire circumference, otherwise it may be pulled inside the door. Seal small cracks with adhesive tape. In case of major damage, replace the entire film.
Install door trim.