Ford KA: Removing and installing the inner part of the front fender (Mazda 121 (3))

Removal

Mark the position of the front wheel on the hub so that you can then install the balanced wheel in its original position. Loosen the wheel nuts with the car on the ground. Raise and support the car from the front and remove the front wheel.



Unscrew the seven screws securing the inner part of the front wing and remove it.

Installation

Insert the inner part of the wing and secure it with screws.

Install the front wheel in accordance with the marks made during removal, having first lightly lubricated the central seat of the wheel disk with consistent grease. Lower the car and tighten the wheel nuts crosswise to a torque of 90 Nm.

The original article is on (mazbook)