Contents: Removal ⇓ Installation ⇓
Removal
Disconnect the negative cable from the battery with the ignition off.
Note: This will erase the data from the electronic memory units. See chapter "Electrical equipment".
Remove the door glass.
Drill out four rivets.
If present, remove the plug (1).
Unscrew the three nuts securing the window lift motor or window lift mechanism.
Remove the window lift together with the electric motor downwards from the door.
Installation
Insert the window lifter into the door, align it and secure it with rivets. The diameter of the rivets is 4.8 mm. For this, you will need a suitable device for installing rivets.
If so, secure the power window motor with bolts and connect the plug.
Install door glass.
Install door trim.
Connect the negative cable to the battery.
Set the clock readings, enter codes if necessary.