Contents: Checking the level ⇓ Oil change ⇓
Checking the level
1. Place the vehicle on a flat, horizontal surface.
2. Unscrew the filler plug and remove the washer.
3. Make sure that the oil level in the gearbox is at the lower edge of the filler hole.
If necessary, top up the oil level to the specified level.
Oil quality according to API - GL-5
Oil viscosity according to SAE:
- at temperatures above -18°C — 90
- at temperatures below -18°C — 80
4. Install a new washer on the filler plug and tighten the plug.
(Original version of the article on the website: «MazBook.ru»)
- Tightening torque - 40 - 53 Nm
Oil change
1. Place the vehicle on a flat, horizontal surface.
2. Unscrew the back plug and drain the oil from the gearbox.
3. Clean the drain plug.
4. Install a new washer and tighten the drain plug.
- Tightening torque - 40 - 53 Nm
5. Unscrew the filler plug and pour oil into the gearbox.
Oil quality according to API - GL-5
Oil viscosity according to SAE:
- at temperatures above -18°C — 90
- at temperatures below -18°C — 80
- Filling capacity - 1.8 - 2.0 l
6. Make sure that the oil level is within the established norm.
7. Install a new washer on the filler plug and tighten the plug.
- Tightening torque - 40 - 53 Nm