Contents: Checking the level ⇓ Oil change ⇓
Checking the level
1. Place the vehicle on a flat, horizontal surface.
2. Unscrew the filler plug and remove the washer.
3. Make sure that the oil level in the gearbox is at the lower edge of the filler hole.
If necessary, top up the oil level to the specified level. Note: For a gearbox with a limited slip differential, use special oil for a limited slip differential.
Oil quality according to API:
- without limited slip differential - GL-5
- with limited slip differential - GL-6
Oil viscosity according to SAE - 90
4. Install a new washer on the filler plug and tighten the plug.
- Tightening torque - 40 - 53 Nm
Oil change
1. Place the vehicle on a flat, horizontal surface.
2. Unscrew the drain plug and drain the oil from the gearbox.
3. Clean the drain plug.
4. Install a new washer and tighten the drain plug.
- Tightening torque - 40 - 53 Nm
5. Unscrew the filler plug and pour oil into the gearbox.
Note: For limited slip differential gearbox, use special limited slip differential oil.
Oil quality according to API:
- without limited slip differential - GL-5
- with limited slip differential - GL-6
Oil viscosity according to SAE - 90
Filling capacity:
- Gearbox without limited slip differential - 2.55 - 2.55 l
- Reducer with limited slip differential - 2.25 - 2.45 l
6. Make sure that the oil level is within the established norm.
7. Install a new washer on the filler plug and tighten the plug.
- Tightening torque - 40 - 53 Nm