Brake pedal | |
Height (to carpet): | |
– models 1993–1997 of release | 156 - 161 mm |
– 1998 models | 175 - 0.5 mm |
Free move: | |
– Models from 1993-1997: | |
• models with manual transmission | 4 - 8 mm |
• models with automatic transmission | 8 - 12 mm |
– 1998 models | 8 - 12 mm |
Handbrake Lever Travel: | |
– models 1993–1997 of release | 5 - 7 clicks |
– 1998 models | 6 - 8 clicks |
Clearance between brake booster pushrod and master cylinder piston (at a vacuum in a vacuum booster of 500 mmHg) | 0.1 - 0.3 mm |
Disc brakes: | |
Minimum brake lining thickness | See subsection 2.1. |
Minimum brake disc thickness | Indicated on the surface of the disc |
Difference in disc thickness | no more than 0.025 mm |
Maximum allowable disc runout | 0.1 mm |
Drum brakes: | |
– the minimum allowable thickness of the friction material of the brake pads | See subsection 2.1. |
– maximum diameter of the brake drum | Indicated on the drum |
Tightening torques, Nm
Are common | |
Banjo connection bolt on brake caliper | 21 – 30 |
Fixing nuts of the main brake cylinder | 11 – 16 |
Fixing nuts of an arm of the balance beam | 19 – 25 |
Vacuum booster fixing nuts | 19 – 25 |
ABS wheel sensor fixing bolts | 16 – 23 |
Front disc brakes: | |
Caliper fixing bolts | 45 – 49 |
Caliper mounting bracket bolts | 78 – 100 |
Brake disc fixing screws | 10 – 13 |
Rear disc brakes: | |
Caliper fixing bolts | 34 – 39 |
Caliper mounting bracket bolts | 45 – 66 |