Contents: Removal ⇓ Installation ⇓
Removal
1. Release the pressure in the system.
2. Disconnect the refrigerant pipes from the evaporator.
3. Remove the glove box (Mazda). Disconnect the temperature control cable from the door lever (Probe).
4. Disconnect the wires from the evaporator and blower fan housing.
5. Unscrew the bolts and tighten the nuts (indicated by arrows) evaporator and blower fan.
6. Remove the screws, the evaporator housing and the evaporator itself.
Installation
Installation is carried out in the reverse order of removal.