Removal and installation
Attention: during work, do not allow it to come into contact with painted surfaces. If this happens, wash off the spill immediately.
1. Remove the parts in the order they are numbered on the assembly drawing "Removal and installation of the clutch slave cylinder".
Removal and installation of the clutch slave cylinder.
1 - return spring,
2 - hose,
3 - clutch slave cylinder.
2. Install in the reverse order of removal.
3. After installation, bleed the clutch hydraulic (see section "Clutch bleeding").
4. After installation, check and, if necessary, adjust the height and travel of the clutch pedal (see section "clutch pedal").
Disassembly and assembly
When assembling and disassembling the clutch slave cylinder, follow the assembly drawing "clutch slave cylinder".
Clutch slave cylinder.
1 - case, 2 - stem,
3 - piston and piston cuff assembly,
4 - return spring,
5 - bleeder cap,
6 - bleed valve,
7 - housing of the clutch slave cylinder.