Heating regulators (Mazda Capella GC)

Contents: To stop the flow of air from outside ⇓ To ventilate the interior ⇓ Functioning on two levels ⇓ For heating the interior ⇓ For heating and defrosting ⇓ Defrosting and drying the windshield ⇓

To stop the flow of air from outside

Set the ventilation nozzles to position

.
Set the ventilation nozzles to position

To ventilate the interior

Set the ventilation nozzles to position

Functioning on two levels

Set the ventilation nozzles to position

to ensure fresh air movement.

Note: When the temperature control lever is moved all the way to the right, warm air will flow from all vents. When you move the temperature control lever all the way to the left, fresh air will flow from all ventilation nozzles.

For heating the interior

Comment

Type A. The heating power increases as the air flow control lever moves to the position

. However, if fog forms on the windshield, return the lever to the position

.
Type B. The heating power increases as the air inlet button is held down

. However, if fog forms on the windshield, release the button again to cancel this function.

For heating and defrosting

Defrosting and drying the windshield

To maximize the defrosting process, move the temperature control lever to the right and set the fan to level 4.

Before driving, clear your windshield, rear window and side mirrors of ice and snow.

Also clear the hood and the air vents in front of the windshield from snow to ensure the defrosting and drying process can proceed successfully.

The air conditioner is also very effective for defrosting. (At temperatures below 0°C the air conditioner does not work.)