Examination
1. Check the wiper fuse. Check the voltage supply to the wiper motor.
2. Check the operation of the wiper motor, as well as wires and connections. When battery voltage is applied to terminal C, the engine must run at low speed, when voltage is applied to terminal A, the engine must run at high speed.
Replacement
1. Unscrew the fixing nut and remove the wiper arms.
2. Remove the trim panel in front of the windshield. Disconnect linkage rod (arrow) from the engine.
3. Loosen the fixing screws (indicated by arrows) and remove the engine.
4. Disconnect the connector (A) and loosen the fixing screws (IN) rear wiper motor.
5. Installation is carried out in the reverse order of removal.