There are two adjusting screws to adjust the position of the headlights.
Headlight adjustment diagram
Adjust the headlights using the diagram provided. When adjusting the low beam, the center of the high beam area should be approximately 5 cm below and to the right of the crosshairs.
Replacement
Mazda models
1. Disconnect the connection connectors and remove the bulbs.
2. Remove the radiator grille.
3. Remove the turn signal and, if necessary, unscrew the mounting bolts (indicated by arrows) and remove the headlight.
4. Installation is carried out in the reverse order of removal.
Ford Probe models
1. Disconnect the negative battery cable.
 |
 |
2. Loosen the mounting bolts (photo on the left) and nuts (photo on the right) headlights, disconnect the connection connector.
3. Disconnect the lever (A) from the lift mechanism (B). Remove the headlight.
4. Installation is carried out in the reverse order of removal.