Removing
Radio
1. Disconnect the negative battery cable.
2. Remove the appropriate trim panel.
3. Insert the special tools into the holes on the radio panel and remove the receiver.
4. Disconnect the connection connector and the antenna wire.
5. Installation is carried out in the reverse order of removal.
Equalizer
6. Remove the center trim panel.
7. Disconnect the connection connector, unscrew the fixing screws (indicated by arrows) and remove the equalizer.
Front speakers
8. Remove the front door trim panel.
9. Loosen the fixing screws (indicated by arrows), disconnect the connector and remove the speaker.
10. Installation is carried out in the reverse order of removal.
Rear speakers
11. Remove trim panels from C-pillars on Ford Probe models. On Mazda models, remove the trim grilles.
12. Unscrew the fixing screws, disconnect the connection connector and remove the speaker.
13. Installation is carried out in the reverse order of removal.
Tweeters
14. Remove the speaker from the instrument panel and disconnect the connection connector.
Installation
15. Installation is carried out in the reverse order of removal.