Disc brakes
Pad lining thickness - 10 mm
- Minimum thickness - 1.0 mm
Caliper channel diameter — 55 mm
Brake disk:
- Thickness - 14 mm
- Minimum thickness - 12.5 mm
- beat (maximum) — 0.1 mm
Rear drum brakes
Thickness of overlays — 5.0 mm
- Wear limit - 1.0 mm
Drum diameter:
- Standard - 200 mm
- Wear section - 201 mm
Working brake cylinder
- Cylinder bore diameter — 19 mm
- The gap between the piston and the cylinder wall - 0.05 - 0.127 mm
- Maximum - 0.15 mm
Master cylinder
Cylinder bore diameter - 22.22 mm
The gap between the piston and the cylinder wall - 0.05 - 0.127 mm
Wear limit - 0.15 mm
Tightening torques, Nm
Brake pedal to bracket - 20-34
Disc brake caliper mounting bolts:
- Upper - 16-24
- Lower - 20-29
Steering knuckle bolts - 49-75
Flexible brake hose to caliper:
- Front - 22-26
- Rear - 23-34
Bolt of fastening of the working brake cylinder — 9-15
Bolts of fastening of a back axis to a basic board of a brake — 68
Brake tube nut - 13-22
Wheel nuts - 88-119