After installing the door, check that the gap around the perimeter of the door is the same everywhere, and the outer surface of the door is on the same level with the rest of the body elements. To adjust the gap around the perimeter of the door, loosen the bolts securing the door hinges to the door and, moving the door, adjust its position, then tighten the mounting bolts.
Pic. 12.16. Directions of movement of the strike plate of the door lock to adjust the position of the rear of the door
Lastly, loosen the bolts and adjust the position of the strike plate of the door lock so that the rear of the door is flush with the rear door or bodywork (pic. 12.16).