Removing
On models with power windows, disconnect the cable from the negative battery terminal. Disconnect the door wiring harness connector. You may need to remove the door trim or adjacent body panels to access the connector.
Pic. 12.15. Location of door hinge bolts
Mark the position of the door hinge bolts with a marker (pic. 12.15). Remove the door opening limiter.
Open the door and support it with stands or jacks, placing a clean rag between them and the door.
Ask an assistant to support the door. Remove the hinge bolts from the doors or from the rack and remove the door.
Installation
Installation is carried out in the reverse order of removal. Fix the dustproof film (if she filmed), by installing it without wrinkles or breaks. The surface on which the dust and moisture protective film is glued must be perfectly clean.
If you are installing a previously removed door, align the previously applied marks.