1. Raise the vehicle, place it on stands and remove the front wheel.
2. Remove the front bumper cover (see paragraph 12).
3. Remove the screws to the rap pen and remove the poker (pic. 13.3).
4. Open the hood and remove the upper wing-to-body bolts (pic. 13.4).
5. Turn out bolts of fastening of the bottom edge of a wing to a body (pic. 13.5,a,6).
6. Remove the fender. This work is best done by two people to reduce the risk of damage to neighboring parts during the detachment of the wing.
7. The wing is installed in the reverse order of removal.