Contents: Front seat ⇓ Back seat ⇓
Front seat
1. Slide the seat forward to access the rear mounting bolts, then slide the seat back to access the front mounting bolts.
2. Remove the caps from the bolts and unscrew all the bolts and nuts securing the seats (figure 31.2,a,6).
3. Lift the seat and disconnect the electrical wiring connectors from it. Remove the seat from the vehicle interior.
4. Installation is carried out in the reverse order of removal.
Back seat
5. Lower the rear seat back down, then remove the screws and all trim panel fastening clips. Move the seat belts to the side and remove the rear seat cushion mounting bolts on each side (figure 31.5,a,6).
 |
 |
6. Lift the trim and unscrew the central bolts securing the seat back (figure 31.6).
7. Installation is carried out in the reverse order of removal.
[The article is copied from the website: MazBook.ru]