Caution! The outside rearview mirror may be damaged by removing ice from its surface. When adjusting the position of the mirror, do not apply excessive force. Use a de-icer spray, a hair dryer, a sponge or a soft cloth for this purpose.
Electrically adjustable outside rearview mirror
The outside rearview mirror switch is located on the instrument panel. It is designed to adjust the position of the left and right mirrors. The mirror adjustment is carried out as follows.
Figure 1.11. Location of the mirror selection switch (1) and mirror position adjustment switch (2)
(The original article is posted on: mazbook)
1. The switch is set to the right or left position depending on which outside rearview mirror position needs to be adjusted (figure 1.11).
2. Press the corresponding side of the mirror adjustment switch to adjust the mirror rotation angle.
Caution! Once the mirror has been moved to its full stop, the electric motor continues to operate until the switch is turned off. Do not run the electric motor for longer than necessary.
Please note: If your vehicle is equipped with a folding outside rearview mirror, you can fold it by rotating it toward the door if necessary.
Rearview mirror in the passenger compartment
The mirror can be adjusted by turning the lever to one of two positions.
The mirror is adjusted using the drive lever.
In the basic position, the lever at the bottom of the mirror should point forward.
To avoid being blinded by the headlights of a car behind you, change the angle of the mirror by moving the lever back.