Attention! Do not install the grille shroud when the outside temperature is above -5°C as this may cause the engine to overheat.
Upper radiator shroud
Install the radiator shroud as follows:
- Open the hood.
- Loosen the top cover.
- Remove the cover.
Fasten the radiator grille shroud to the back of the grille with four tapes as follows:
Pic. 1.10. Using a retainer (4) ribbons (2) for attaching the radiator grille shroud (1) and direction (3) latch release
- pass through the opening of the casing of the radiator lining the clamps of the tapes (pic. 1.10);
- Attach the clips to the radiator cowl.
For removal of a casing of facing of a radiator pull for a clamp in the direction shown by an arrow on fig. 1.10.
Lower grille cover
Install the shroud as follows:
- Insert the rubber bushings into the lower radiator grille.
- Fasten the lower casing of the radiator lining to the caps.