18.6.1. Removal and installation
Removal and installation can be carried out after removing the radiator grille. To do this, use a small screwdriver to press down on the 6 fixing clips of the grille and lift it up. Pull out the plug on the back side.
Pull the rubber cap back over the headlight bulb, turn the bulb cap on the back side (bayonet lock) and remove the lamp.
Do not touch the new lamp with your fingers to avoid stains.
Loosen the headlight frame mounting bolts at the corners and remove the headlight. Remove the springs and take out the optical element of the headlight.
Installation is carried out in the reverse order of removal.
18.6.2. Installing headlights
Headlights must be installed only with the help of an optical device, so as not to violate the laws of the country.
(Article is based on website data: «MAZBOOK.ru»)
If you want to install the headlights with it, then the bolt for side installation is on the inner side of the headlight and the bolt for height installation is on the upper side (see Fig. 266).
Figure 266. Headlight mounting bolts
Figure 267. Headlight mounting: 1. Spring; 2. Set screw; 3. Edging; 4. Front side lighting; 5. Screw; 6. Spring; 7. Spring; 8. Set screw; 9. Headlight frame; 10. Headlight bulb; 11. Headlight glass