Windshield wipers
The ignition key must be in the ON (II) position.
OFF – disabled
INT– intermittent
1 – normal
2 - fast
Turn on the windshield wipers by moving the lever down.
Brushes acting intermittently at variable speed*
Set the lever to the INT position and select the time interval by turning the ring (OFF).
One-touch brushes
To initiate a single wipe cycle, pull the lever to the MIST position (thick fog).
Because heavy ice and snow can cause the wiper blades to jam, the wiper motor is protected by a circuit breaker system. This mechanism will automatically stop the brushes, but only for 5 minutes. If this happens, turn off the brushes and stop in a safe place. After 5 minutes, turn the brushes back on - they should work normally. If they do not work, consult with an authorized Mazda dealer as soon as possible.
Windshield wash
The ignition key must be in the ON (II) position.
Warning! At freezing temperatures, windshield washer fluid can freeze on the windshield and impair your visibility, which could easily lead to an accident. Do not use the washer without first warming up the windshield.
Pull the lever towards you and hold it to spray the cleaning fluid. In the OFF or INT positions, the brushes will remain engaged until the lever is released.
For details, see the website MAZBOOK.RU
If the washer does not work, check the fluid level. If it is OK, consult an authorized Mazda dealer.