Electric Idle Governor (EGI) Valve — adjustment (Mazda Capella GC)

1. Connect the tachometer to the engine, then start the engine and warm it up to normal temperature.

2. Separate the electrical wiring from the valve.

3. Connect the ground to the BrY terminal. With all electrical components turned off, the engine idle speed should be 900-1000 rpm. If not, adjust the idle speed adjustment screw as necessary.



4. Stop the engine and remove the tachometer.

Based on website data www.mazbook.ru

5. Before installing the connector, use an ohmmeter to check the resistance across the valve terminals, the resistance should be approximately 30 ohms.