Inspection and replacement of windshield wipers (Mazda Capella GC)

1. Windshield and rear wipers (if installed) the glass and its brush assemblies should be periodically inspected for damage, loose fasteners, as well as cracks and signs of wear on the brushes

2. A layer of dirt may build up on the wiper blades, which will reduce their effectiveness. Therefore, brushes should be washed regularly with a mild detergent.

3. In addition, bolts, nuts and connectors may become loose, so when inspecting the wiper blades, they should be checked and tightened as necessary.

4. If the wiper blades have cracks, signs of wear or are deformed, replace the blades.

5. Move the wiper blade assembly away from the glass and remove the wiper blade from the pin by lifting the release lever (photo).

Lift the wiper outlet arm and...

... remove the wiper from the pin

6. Remove the mounting bracket using needle-nose pliers and remove the brush (photo).

Compress the wiper tabs and remove the wiper along the arm

7. Insert the new brush and snap the mounting bracket into place.

8. Raise the release lever and insert the brush pin until it snaps securely into position.

9. Check the wiper arm nut to make sure it is tightly tightened (photo).