Removing
1. Remove the clutch release cylinder.
2. Remove the gearbox.
3. Remove the bearing yoke from the ball joint, press on the spring and remove the release bearing together with the yoke.
Inspection
1. Try rotating the inner race of the bearing by pushing it in. Replace bearing if necessary.
2. Inspect the release lever for cracks or deformation.
Installation
1. Fill the inner groove of the release bearing with high temperature grease. Also lubricate the input shaft splines, ball joint and bearing mount.
2. Lubricate the socket on the lever and the ends of the release bearing yoke with high-temperature grease, install the bearing on the fork.
3. Install the bearing on the shaft and install the bearing yoke on the ball joint.
4. Further installation is carried out in the reverse order of removal.