Parking brake lever assembly parts
1. Screw; 2. Facing; 3. Parking brake switch connector; 4. Adjusting nut; 5. Bolts; 6. Assembling the parking brake lever; 7. Handle; 8. Button
1. Remove the parking brake trim.
2. Disconnect the switch.
3. Remove the adjusting nut.
4. Remove the mounting bolts, disconnect the parking brake cable and remove the assembly from the vehicle.
[The article is based on website data: MazBook]
5. Inspect the ratchet sector and pawl for damage and check that the return spring is not weakened. Replace components as necessary.
6. Before installation, lubricate the ratchet teeth with a small amount of white lithium grease.
7. Installation is carried out in reverse order. Finally, adjust the parking brake.