Removing
1. Remove the front timing belt cover (Chapter 3).
2. Remove the gear drive and sing the belt (Chapter 5).
3. Clamp the sprocket in position so that it cannot turn using the socket and socket on one of the cover front bolts. Remove the sprocket bolt, sprocket and washer.
Installation
4. Place sprocket in position on camshaft, align sprocket and marks on cap. The knock pin on the camshaft must align with the hole in the sprocket.
5. Clamp the camshaft sprockets, install the washer and bolt. Tighten the bolt with the torque specified in the Specification.
6. Install the toothed drive belt, cover and any other parts that were removed.