The protective cover of the steering mechanism provides protection of details from dirt and water. It must be periodically checked for holes, cracks and other damage, as well as for wear. Replace damaged boots immediately to prevent serious damage to the steering gear. To do this, do the following.
Remove the tie rod end.
Loosen the locknut from the tie rod.
Remove the clamps securing the protective cover.
Remove a protective cover of the steering mechanism from steering draft.
Clean the protruding part of the rail from the dirt. Lubricate the rack with lubricant and add a few drops inside the new boot.
Install the new boot so that the larger diameter of the boot is above the rack and steering gear housing.
Secure the cover with new clamps.
Screw on a counternut and a tip of steering draft.