Turning on the light
Pic. 1.17. Directions of rotation and fixed positions of the handle at the end of the light switch lever: a - off; b is the first fixed position; c - second fixed position
To turn on the headlights, turn the knob at the end of the light switch lever (pic. 1.17).
When the handle is turned to the first detent position, the parking lights, tail lights, license plate lights and instrument panel lights come on.
When the knob is turned to the second detent position, the headlights, parking lights, tail lights, license plate lights and instrument panel lights come on.
If the lever is pushed forward, the high beam lights up; if pushed back, the dipped headlights turn on.
Emergency light signaling
To turn on the hazard warning light, pull the lever towards the steering wheel. When the lever is released, it will return to its original position. The hazard warning light may also come on when the headlights are off.
When the hazard warning light comes on, the blue high beam indicator lamp will illuminate.
In hazardous traffic situations, both during the day and at night, turn on the hazard warning lights to warn other road users. In the future, always turn it on when performing emergency repairs or when the vehicle is stopped at the edge of the road. To turn on the system, press the switch, which works regardless of the ignition. The turn signal lamps flash at the same time.
Light warning signal
If you forget to turn off the lights when you turn off the engine, an audible signal will sound for a certain time.
Direction indicators
Pic. 1.18. Direction of movement of the light switch lever when turning on the turn signals (A) and giving a turn signal before changing lanes (b)
Move the switch up to turn on the right turn signal, move the switch down to turn on the left turn signal (pic. 1.18).
At the included index of turn the control lamp blinks.
After passing the corner, the turn signal will automatically turn off.
To give a turn signal before changing lanes, the switch must be pressed up or down until the back pressure increases and held in this position - the control lamp must flash simultaneously with the direction indicator.