1. Remove hub/brake drum assembly (Section 1, Chapter 27).
2. Disconnect the brake hydraulic tube from the working brake cylinder. Be prepared for fluid leakage.
3. Remove the four bolts that hold the drum brake shield to the stub axle fastener. Remove the drum brake disc and place it aside, within the travel limit of the parking brake cable.
4. Unscrew the side connections, longitudinal balancer and strut/shock absorber from the axle mounting. Now you can shine the stub axle fastener.
5. Assembly is carried out in the reverse order. Additionally, it is necessary to bleed the brake hydraulic system, adjust the hub bearings and the parking brake, and tighten the various connectors with the torque specified specification (when known).