Late model specifications (Mazda Capella GC)

The specifications below are revisions or additions to the preceding Sections Adjustment and Routine Maintenance

Total by engine (all models)

Engine idle speed:

• 1.6 manual transmission - 800±50 rpm
• 1.6 automatic transmission - 950±50 rpm
• 2.0 manual transmission - 800±50 rpm
• 2.0 automatic transmission - 900±50 rpm

CO level at idle:

• Manual transmission - 4.0±0.5%
• Automatic transmission - 2.0±0.5%

Ignition system

• Spark plug type (eGI engine) — Champion RN9YC NGK BPR - 6ES Nippon Denso W20 EXR - U
• Spark plug gap: 8.0 mm

Fuel and exhaust systems

Carburetor (with automatic air damper)

• Automatic air damper diaphragm clearance: 1.66-2.16 mm
• Installation of fast cold. throttle travel - 0.94-1.38 mm
• Throttle lock size: 7.32-8.28 mm
• Damper load compensator clearance: 0.07-0.51 mm

Electronic Gas Injection (EGI)

• Intake air temperature sensor resistance:
• At an air temperature of 20°C - 2205-2695 Ohm
• At an air temperature of 60°C - 493 - 667 Ohm
• Injector delivery volume (within 15 seconds) — 44 - 61 cm³
• Fuel pressure at idle speed - 1.86-2.28 Bar
• Fuel pump pressure: 3.45-4.89 Bar
• Water temperature sensor resistance:
• At a water temperature of 20°C - 2210 - 2690 Ohm
• At a water temperature of 80°C - 290 - 354 Ohm

Engine electrical system

Generator

• Rotor winding resistance is 2.0-2.6 Ohm

Brakes

Front ventilated brake discs (late 1984 models)

• Disc thickness:
  • New - 20.0 mm
  • Maximum permissible - 18.5 mm

Rear disc brakes

• Brake pad thickness:
• New - 8.0 mm
• Maximum permissible - 1.0 mm
• Disc thickness:
• New - 10.0 mm
• Maximum permissible - 9.0 mm

(Article is based on website data: www.mazbook.ru)

• Disc output - 0.1 mm maximum

Tightening torques Nm

• Rear Caliper Guide Pins - 63-82
• Rear Caliper Mounting Bracket - 49-74