Note. The hub together with the bearing form a single non-separable unit. If the hub or bearing fails, replace the entire assembly.
1. Loosen the rear wheel nuts. Raise the rear of the vehicle and place it on stands. Remove the wheel.
2. Remove the cap and loosen the hub nut.
3. Using a socket wrench with a long lever, loosen the step nut.
4. Remove the brake drum or brake disc (see chapter 9).
5. Turn away a nave nut.
6. Remove the hub with the bearing.
7. Installation is made in sequence, return to removal. Tighten the hub nut to the required torque. If the vehicle is equipped with rear disc brakes, tighten the caliper and bracket mounting bolts to the specified torque (see technical data at the beginning of chapter 9).